+44 121 552 5511
Uddeholm Mirrax ESR
A UNIQUE COMBINATION OF TOUGHNESS, CORROSION RESISTANCE AND THROUGH-HARDENING PROPERTIES
Uddeholm Mirrax ESR is a through hardening corrosion resistant steel with very good polishability. Mainly intended for medium to large cross sections. It has a unique combination of toughness, corrosion resistance and through-hardening properties.
- Low mould maintenance costs:
- The surface of cavity impressions retain their original finish over extended running periods.
- Moulds stored or operated in humid conditions require less protection.
- Low production costs:
- Water cooling channels are less affected by corrosion
- Heat transfer characteristics, and therefore cooling efficiency, are constant throughout the mould life, ensuring consistent cycle times.
- Safe mould use because of good toughness also in big dimensions
- Good corrosion resistance
- Excellent through-hardening properties
- Good ductility and toughness
- Good wear resistance
- Excellent polishability
- Corrosion resistance 90%
- Wear resistance 70%
- Polishability 90%
- Toughness 60%
Configure & Buy
-
6-Side-Machining
6-Side-Machining
6-Side-Machining: Uddeholm Mirrax ESR
Dimensions & options
-
Flat Bar
Flat Bar
-
Round Bar
Round Bar
Chemical composition
| Carbon | 0.25 | Silicon | 0.35 | Manganese | 0.55 |
| Chromium | 13.30 | Molybdenum | 0.35 | Nickel | 1.35 |
| Vanadium | 0.35 | Nitrogene | +N |
Contact us for further information
