Cold Work Tool Steel

Choosing the right tool steel for the application becomes more and more important as the demands on the tool increases. What are these demands? The tool must have sufficient wear resistance. The tool must perform reliably and not fail due to premature chipping, cracking or plastic deformation. An optimal tooling economy – the lowest possible tooling cost (including maintenance) per part produced – can only be achieved if the correct tool steel for the application in question is used.


Downloads

uddeholm-vanadis-4-extra-superclean-1 (1)
25%

Abrasive wear resistance

30%

Adhesive wear resistance

35%

Ductility/edge chipping resistance

30%

Toughness/gross cracking resistance

35%

Abrasive wear resistance

60%

Adhesive wear resistance

75%

Ductility/edge chipping resistance

50%

Toughness/gross cracking resistance

20%

Abrasive wear resistance

50%

Adhesive wear resistance

80%

Ductility/edge chipping resistance

50%

Toughness/gross cracking resistance

20%

Abrasive wear resistance

30%

Adhesive wear resistance

85%

Ductility/edge chipping resistance

80%

Toughness/gross cracking resistance

35%

Abrasive wear resistance

40%

Adhesive wear resistance

45%

Ductility/edge chipping resistance

50%

Toughness/gross cracking resistance

90%

85%

100%

70%

30%

Abrasive wear resistance

30%

Adhesive wear resistance

30%

Ductility/edge chipping resistance

30%

Toughness/gross cracking resistance

50%

Abrasive wear resistance

30%

Adhesive wear resistance

25%

Ductility/edge chipping resistance

25%

Toughness/gross cracking resistance

85%

Abrasive wear resistance

10%

Adhesive wear resistance

10%

Ductility/edge chipping resistance

10%

Toughness/gross cracking resistance

55%

Abrasive wear resistance

25%

Adhesive wear resistance

20%

Ductility/edge chipping resistance

10%

Toughness/gross cracking resistance

100%

100%

80%

100%

25%

Abrasive wear resistance

55%

Adhesive wear resistance

100%

Ductility/edge chipping resistance

70%

Toughness/gross cracking resistance

65%

Abrasive wear resistance

75%

Adhesive wear resistance

70%

Ductility/edge chipping resistance

40%

Toughness/gross cracking resistance

100%

Abrasive wear resistance

70%

Adhesive wear resistance

50%

Ductility/edge chipping resistance

30%

Toughness/gross cracking resistance

100%

Abrasive wear resistance

75%

Adhesive wear resistance

25%

Ductility/edge chipping resistance

20%

Toughness/gross cracking resistance

65%

Hardness (HRC) max

70%

Abrasive wear resistance

70%

Adhesive wear resistance

50%

Ductility/edge chipping resistance

30%

Toughness/gross cracking resistance

75%

Abrasive wear resistance

60%

Adhesive wear resistance

40%

Ductility/edge chipping resistance

27.5%

Toughness/gross cracking resistance

100%

Abrasive wear resistance

60%

Adhesive wear resistance

30%

Ductility/edge chipping resistance

25%

Toughness/gross cracking resistance

70%

Abrasive wear resistance

100%

Adhesive wear resistance

50%

Ductility/edge chipping resistance

30%

Toughness/gross cracking resistance

35%

Abrasive wear resistance

35%

Adhesive wear resistance

45%

Ductility/edge chipping resistance

45%

Toughness/gross cracking resistance

Contact us for further information
Follow us