Cold Work Tool Steel

Choosing the right tool steel for the application becomes more and more important as the demands on the tool increases. What are these demands? The tool must have sufficient wear resistance. The tool must perform reliably and not fail due to premature chipping, cracking or plastic deformation. An optimal tooling economy – the lowest possible tooling cost (including maintenance) per part produced – can only be achieved if the correct tool steel for the application in question is used.

Uddeholm Vancron SuperClean

70%

Abrasive wear resistance

100%

Adhesive wear resistance

50%

Ductility/edge chipping resistance

30%

Toughness/gross cracking resistance

Uddeholm Unimax

25%

55%

100%

70%

Uddeholm Arne

25%

30%

35%

30%

Uddeholm Caldie

40%

70%

70%

60%

Uddeholm Calmax

20%

50%

80%

50%

Uddeholm Carmo

20%

30%

85%

80%

Uddeholm Chipper

35%

40%

45%

50%

Uddeholm Fermo

20%

20%

50%

50%

Uddeholm Rigor

30%

30%

30%

30%

Uddeholm Sleipner

50%

30%

25%

25%

Uddeholm Sverker 3

85%

10%

10%

10%

Uddeholm Sverker 21

60%

20%

20%

20%

Uddeholm Vanadis 4 Extra SuperClean

65%

Abrasive wear resistance

75%

Adhesive wear resistance

70%

Ductility/edge chipping resistance

40%

Toughness/gross cracking resistance

Uddeholm Vanadis 8 SuperClean

100%

Abrasive wear resistance

70%

Adhesive wear resistance

50%

Ductility/edge chipping resistance

30%

Toughness/gross cracking resistance

Uddeholm Vanadis 23 SuperClean

70%

Abrasive wear resistance

70%

Adhesive wear resistance

50%

Ductility/edge chipping resistance

30%

Toughness/gross cracking resistance

Uddeholm Vanadis 30 SuperClean

75%

Abrasive wear resistance

60%

Adhesive wear resistance

40%

Ductility/edge chipping resistance

27.5%

Toughness/gross cracking resistance

Uddeholm Vanadis 60 SuperClean

100%

Abrasive wear resistance

60%

Adhesive wear resistance

30%

Ductility/edge chipping resistance

25%

Toughness/gross cracking resistance

Contact us for further information

Fields marked with * are mandatory.


Share it