Uddeholm Vanadis 23 SuperClean
SUPERIOR MACHINABILITY AND GRINDABILITY
Uddeholm Vanadis 23 Super Clean is a high alloyed powder metallurgical high speed steel with a good abrasive wear resistance in combination with a high compressive strength. Recommended for selective special areas e.g special forging applications where very good wear resistance is needed and trimming /cutting applications. The machinability and grind ability are superior to conventional high speed steel and so is the dimensional stability after heat treatment. In east/south east asian countries served by Assab, Uddeholm Vanadis 23 Super Clean is sold as Assab pm 23.
- Good wear resistance
- Ok chipping resistance
- High compressive strength
- High hardness
- Good dimensional stability
- Good temper back resistance
- Abrasive wear resistance 70%
- Adhesive wear resistance 70%
- Ductility edge chipping resistance 50%
- Toughness gross cracking resistance 30%
Reference Grade Hot Work (D2)
- Abrasive wear resistance 55%
- Adhesive wear resistance 25%
- Ductility/edge chipping resistance 20%
- Toughness/gross cracking resistance 10%
Chemical composition
| C | 1.28 | Cr | 5.00 | Mo | 6.40 |
| V | 4.20 | W | 3.10 |
Contact us for further information