Uddeholm Unimax

GREAT WEAR RESISTANCE EVEN OVER EXTENDED TIME AT ELEVATED TEMPERATURES

Uddeholm Unimax is a high hardness hot work tool steel which provides great wear resistance even over extended time at elevated temperatures. It performs very well in precision forging and hot stamping.
  • Improved durability and wear resistance in moulding processes that wear hard on the mould like, long run production, moulding of reinforced plastics and compression moulding
  • Longer tool life and a smoother production run with fewer disturbances for maintenance due to the high ductility
  • Problem solver in severe cold work applications where high chipping resistance is required
  • The high hardness and toughness together with the good dimension stability makes Unimax suitable as a substrate steel for surface coating when needed
  • The very good hardenability and the unique properties profile of Unimax make it especially suitable for larger moulds. Unimax is therefore supplied in larger dimensions
  • Excellent toughness and ductility in all directions
  • Good wear resistance
  • Good dimension stability at heat treatment and in service
  • Excellent through-hardening properties
  • Good resistance to tempering back
  • Good hot strength
  • Good thermal fatigue resistance
  • Excellent polishability

Uddeholm Unimax

  • Abrasive wear resistance 30%
  • Adhesive wear resistance 65%
  • Ductility/edge chipping resistance 100%
  • Toughness/gross cracking resistance 60%
  • Hardness (HRC) max 58%

Reference grade Cold Work (D2)

  • Abrasive wear resistance 55%
  • Adhesive wear resistance 25%
  • Ductility/edge chipping resistance 20%
  • Toughness/gross cracking resistance 10%
  • Hardness (HRC) max 62%
Chemical composition
Carbon .5 Silicon .2 Manganese .5
Chrome 5 Molybdenum 2.3 Vanadium .5
Contact us for further information
Share it