Uddeholm Vanadis 10 SuperClean

    THE HIGHEST WEAR RESISTANCE OF ALL THE PM TOOL STEEL GRADES

    The highest wear resistance of all the PM tool steel grades makes Uddeholm Vanadis 10 SuperClean suitable for high production volumes of abrasive materials. The PM process ensures better chipping resistance than the conventionally produced high wear resistant tool steel.

    • Best wear resistance for long run tooling
    • High compressive strength
    • Highest abrasive wear resistance of all the PM grades
    • High hardness
    • Good dimensional stability
    • Good temper back resistance

    Uddeholm Vanadis 10 SuperClean

    • Abrasive wear resistance 100%
    • Adhesive wear resistance 75%
    • Ductility/edge chipping resistance 25%
    • Toughness/gross cracking resistance 20%
    • Hardness (HRC) max 65%

    Reference grade Cold Work (D2)

    • Abrasive wear resistance 55%
    • Adhesive wear resistance 25%
    • Ductility/edge chipping resistance 20%
    • Toughness/gross cracking resistance 10%
    • Hardness (HRC) max 62%
    Chemical composition
    Carbon 2.90 Silicon 0.50 Manganese 0.50
    Chromium 8.00 Molybdenum 1.50 Vanadium 9.80
    Contact us for further information